Modular Modem 336MM-P / 560MM-P

336MM-P, 560MM-P, Parallel Interface Modular Modems™

The Modular Modem™ is a self-contained modem that provides systems designers the flexibility to include modem functionality in any system product with minimal engineering resources. This modem features 0^oC to +70^oC extended temperature operation, optional 2-wire leased-line,and ASVD. Some selected models - 336/560MM-PW are built with an on-board International DAA and the firmware supports more than 30 countries telecom requirements worldwide.

Features:

Parallel interface
V.90, 56 kbps data (560MM-P)
V.34, 33.6 kbps data (336MM-P)
14.4 kbps fax
Voice playback and record
DTMF decode
2.16" x 3.65" x 0.375"
V.42, MNP 2-4 and 10 error correction
V.42bis, and MNP-5 data compression
FCC Part 68 registered
FCC Part 15 compliant
ASVD & speakerphone (option)
2 wire leased-line (option)

Applications:

Set-Top Boxes
WebPhone
Notebook PC
Remote Diagnostics
Remote Monitoring
Remote Telemetry

Utility Meters
Vending Machine
Credit Card Terminals
POS Terminals
Embedded Applications
Other Data Acquisition Devices

Ordering Information:

Model No.	Data Rate (kbps)	Fax Rate (kbps)	Voice Mail	Global PTT Compliance	Cellular Interface
560MM-P	56	14.4	Yes	___	___
560MM-PC	56	14.4	Yes	___	Yes
560MM-PW	56	14.4	Yes	Yes	___
336MM-P	33.6	14.4	Yes	___	___
336MM-PC	33.6	14.4	Yes	___	Yes
336MM-PW	33.6	14.4	Yes	Yes	___

Ratings @ 25^o C

Parameter	Min	Max	Units
Tip / Ring Current Continuous	0	120	mA
Dielectric Withstanding Voltage	-	1000	VRMS
Operating Temperature	0	+70	^oC
Relative Humidity (non-condensing)	10	95	^o/_o
_{Voltage Requirement}	_4.75	_5.25	_V
_{Power Consumption}	₇₂₀	₈₈₀	_mW
_{Transmit & Receive Level}	_{-10 (Tx)}	_{-43 (Rx)}	_dBm

Mechanical Diagram & Pin Assignments - Parallel Interface
Note: Header extends on non-component side. Can be reversed if necessary. (contact factory) Header length is 0.236" on non-component side. Pin spacing is 0.100" from center to center. Tip and ring clearance must exceed 0.100" metal to metal.

Information furnished by Radicom Research is believed to be accurate and
reliable. However Radicom Research assumes no responsibility for its use, or
any infringement of patents or other rights of third parties which may result
from its use. Radicom Research reserves the right to change circuitry at any
time without notice. This document is subject to change without notice.

The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners.