56K Standalone Data/Fax Modems
|
|
|
|
|
Available: |
|
Size: 4" x 6" x 0.88" |
|
Up to 56Kbps Data Rate |
|
14.4Kbps Fax, Voice Playback and Recording |
|
RoHS Compliant |
|
Contact ID Protocol Support (V92SAC4) |
|
|
|
|
|
|
|
Measuring only 4"x 6" x 7/8" in size, it weighs less than 10 oz, this stand-alone modem family is compact and full-featured. Its standard features include receiving data speed at rate up to 56 kbps, sending and receiving fax at 14.4 kbps, voice playback and recording. The modem family is cUL (File No. #E189947) certified. Features
Ademco Contact ID Support (V92SAC4) 56 kbps receive data speed 33.6 kbps send data speed Voice playback and recording Maintains complete ITU-T compatibility for all lower speeds including V.34 (33.6 kbps) and below V.17 for 14.4 kbps send and receive fax Extended AT command set V.42 and V.44 MNP 2-4 error correction V.42bis and MNP-5 data compression Auto answer & auto dial (tone/pulse) RS232/V.24/V.28 compatible -
0°C to +60°C operating temperature
-
-20°C to +75°C non-operating temperature
-
RoHS compliance
FCC 68, CS03, CE certified FCC 15 compliant UL 60950 Listed (on selected model) Designed to meet world-wide safety requirements
Standalone Modems Specifications
Data Compatibility
ITU-T V.92/56,000 bps -
ITU-T V.34/ 33600 - 28800 bps
ITU-T V.32bis, V.32, V.22bis, V.22, V.21/Bell 103 Automatic detection and connection of type and speed
DTE Fixed and Autobaud Speeds
Automatic sense of baud rate & parity at any DTE speeds:
115K, 57.6K, 38.4K, 19.2K, 9600, 7200, 4800, 2400, 1200, 600, and 300 bps.
Dialing Protocol
Extended ‘AT’ Commands DTMF Tones or Pulse
Operational Modes
Speed Buffering for fixed DTE speed Automatic Dial and Answer Manual Dial and Answer 2 wire dial up Automatic DATA or FAX determination
Physical
Size: 0.88" H x 4.0" W x 6.0"L Weight: 10oz-modem / 11oz-AC adapter MTBF Greater Than 50,000hrs
|
Ordering Information
Model No. |
Data |
Fax |
Voice |
Contact ID Support |
V92SAC |
56k bps |
14.4K bps |
Yes |
No |
V92SAC4 |
56k bps |
14.4K bps |
Yes |
Yes |
____________________________________________________________________________________________________________ Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners. |
