PCI Bus Internal Data/Fax/Voice ModemsThe 560PCI/HCF modem family is full featured, self-contained data / fax / voice modems, designed for PCI Bus applications. The V.92 compatible model provides data receive rate for up to 56 kbps and send rate up to 48 kbps. The modems feature Fax Group 3, send and receive fax rates up to 14.4 kbps. Some selected models also support Speakerphone and SVD. The modem family is FCC68, CS-03, and CTR21 certified, c/UL1950,
Features
- 56 kbps receiving data speed (560i-series)
- 48 kbps send data speed (v.92 model)
- 33.6 kbps sending data speed (v.90 model)
- DTMF decoding
- V.80 video conferencing ready (H.324)
- V.17 for 14.4 kbps send and receive fax
- Full-duplex speakerphone (optional)
- Caller ID support (optional)
- Extended AT command set
- V.42 and MNP 2-4 (error correction)
- V.42bis and MNP-5 data compression
- 3.3V operation with +5V tolerant digital inputs
- FCC68, CS-03 certified
- CSA/UL 1950 3rd Edition approved
Ordering Information:
Models Receive Data (bps) Send Data (bps) Fax Speed (bps) Speaker Phone Simultaneous Voice & Data 560PCI/HCF 56k 33.6k 14.4k N/A N/A 560PCI/V.92 56k 48k 14.4k N/A N/A 560PCI/SP-V.92 56k 48k 14.4k Built-in Built-in
Specifications
- Data Compatibility
- V.92, V.90, 56 kbps compatible
- V.34/ 33600 - 28800 bps
- V.32bis, V.32, V.22bis, V.21/Bell 103
- Automatic detection and connection of type and speed
- FAX Compatibility
- ITU-T V.17 - 14.4 kbps send and receive fax
- EIA Class 1 and II, Group III
- Video and Voice Compatibility
- V.80 video conferencing ready (H.324)
- SVD V.61 compatible
- Full-duplex speakerphone (optional)
- Error Correction & Data Compression
- EC-ITU-T V.42, LAPM & MNP 2-4
- DC-ITU-T V.42bis, MNP-5 and MNP-10EC
- DTE Fixed and Autobaud Speeds
Automatic sense of baud rate & parity at any DTE speeds:
115K, 57.6K, 38.4K, 19.2K, 14.4K, 12.0K, 9600, 7200, 4800, 2400, 1200, 600, and 300 bps.
- Telephone Line Speeds (bps)
56,000* , 33600, 28800, 19200, 14400, to 300 bps automatic detection, connection and speed conversion regardless of DTE speed setting.
- DTE Interface
- 32-bit PCI Local Bus interface
- Dialing Protocol
- Extended "AT" Commands
- DTMF tones or pulse
- Data Format
- Full duplex asynchronous
- Flow control XON/XOFF and RTS/CTS
- Transmit & Receive Levels
- -10 dBm dial-up (max.)
- -43 dBm dial-up (min.)
- Operational Modes
- MNP, LAPM compression
- Automatic dial and answer
- Manual dial and answer
- Automatic DATA or FAX determination
- Test Modes
- ITU-T V.54 signaling
- Analog loop/self test
- Local digital loop/remote digital loop
- Physical
- Size: 3.5" x 5"
- MTBF greater than 50,000hrs
- System Hardware Requirements
- Pentium 166 MHz or above
- Windows 95/98, NT, Windows 2000
- One available PCI Bus slot
- 8 MB RAM and 35 MB or more free hard drive space (recommended)
- Contents
- Modem
- 6 ft. phone cable
- High speed modem driver
- Quick installation guide
* Features are available on the selected models.
Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice.The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners.
[ Home ][ Company ][ Products ][ Contact Us ][ Career ][ Patents ]
