Products

New Product

*NEW* Modem Module w/ Ethernet option

*NEW* 5G / 2.4GHz USB Wi-Fi Module

*NEW* TinyLAN Serial/USB to Ethernet module

*NEW* Wi-Fi/Ethernet to 8 port Modem Server

*NEW* Wireless AI camera Sensor EVK

*NEW* AI MIPI Camera Module

Embedded Wi-Fi AP/router adapter

Embedded Wi-Fi to Serial module
    temperature range -40 to +105°C

USB Communication Dongles

Wire Communications -

- Analog Modem -> V92HU-E2 / V92MB-U-E

- Ethernet Modem -> LUHM200 / LUHM325

Wireless Communications -

- Wi-Fi -> RW8300E-NL / WiFiHU52E / RW8711

- Wi-Fi + Ethernet -> RW8300E

- Wi-Fi + Ethernet + BLE -> RW8300E-B3

Ethernet Products

All in One Wi-Fi/Ethernet Station

Medical MOPP Ethernet Switch

USB to Ethernet Adapters -

- IEC 60601-1 Certified MOOP/MOPP

- 3.0 to 2.5G bps

- 3.0 to Gigabit Ethernet

- 2.0 to 100M bps

Ethernet/Wi-Fi/USB/Serial Converter

Ethernet to Serial / Modem Adapter

Ethernet to Analog Modem Adapter

Wireless Modems

Wi-Fi Cables -

- RJ-45/DB9

Wi-Fi Modems -

- USB/SMD

- USB

- UART, SPI

- PCIe Wi-Fi

- PCIe (M2) Wi-Fi

Bluetooth Modems -

- BT4.2

- BT5.1 *NEW*

- BT5.3 *NEW*

3G Cellular Modems

2.4GHz Transceiver

GPS Module

PSTN, Dial-Up Modems

By Interfaces -

By Applications -

PC/104 Products

PC/104 Modem

PC/104 3G Cellular

PC/104 Wi-Fi

PC/104 Ethernet

Custom Specifications

Build-to-Suit, Wired or Wireless

Embedded Serial-to-Ethernet Modules
 

LSHM-200 (Or LSDM8300SM for new design)		LSDB-200

Measuring only 1” (W) x 1” (D) x 0.25” (H), the LSHM-200 family of Embedded Serial-to-Ethernet Modules connect serial devices to IP networks with a 10/100BaseT interface.  They provide an easy solution for connecting micro controller based systems with serial port to IP networks for remote control, and monitoring applications.

The LSHM-200 family allows for seamless access and communications of serial data through any 10/100BaseT Ethernet.  They can transfer data among multiple IP addresses simultaneously via Telnet ports with TCP/IP protocols under Ethernet.  The onboard Ethernet functions are designed to meet IEEE std 802.3™ with automation and buffering.  The integrated serial port includes standard serial terminal features such as flow control and standard 8-N-1character lengths.

The serial interface of LSHM-200 family supports DTE speeds up to 230K bps.  The LSHM-200 family features -40^oC to +85^oC operating temperature and are RoHS compliant.

There are two models available, LSHM-200 and LSHM-201.  The LSHM-200 includes 2-channel DMA and a 7-bit 2-channel ADC while the LSHM-201 has a 4-channel DMA and an 8-bit 8-channel ADC built in.  The LSHM-201 includes external Flash memory allowing for updating firmware with the latest enhancement or implementing firmware changes for custom applications.

The Development Kit LSDK-2001 and LSDK-2011 are designed for engineer's testing, programming and evaluation convenience.  Each kit includes an LSHM-200 or LSHM-201 mounted on our carrier board with all needed connectors, power adapter and cable accessories.

Features:

• Compact size - 1" x 1" x 0.25" (H)

• -40^oC to +85^oC operating temperature

• Serial TTL interface

• 10/100BaseT network interface, auto-detect

• 10MB or 100MB data transfer rate configurable

•  Designed to meet IEEE std 802.3™

• Complete Serial-to-Ethernet connectivity solution including:
  Network Processor, Mac and PHY interface

• Support of TCP/IP, UDP, Telnet, HTTP, ICMP and ARP

• DHCP and static IP support

• LED pins out for monitoring Ethernet and link activity

• Built-in 32K SRAM for Ethernet buffering

• NVRAM for storage of configurations

• External flash memory (LSHM-201 only)

• DTE data speed up to 230K bps

• Hardware and software flow control

Ratings @ 25o C Parameter Min Max Typical Units Operating Temperature -40 +85 +25 °C Relative Humidity (non-condensing) +10 +90 N/A % Voltage Requirement: 3.3V system 3.0 3.6 3.3 VDC Power Consumption 780 1080 900 mW Current 260 300 274 mA Ordering Information Model Number Interfaces VCC Dimensions Descriptions LSHM-200 Serial TTL Ethernet 3.3 VDC 1" x 1" x 0.25"(H) Connect serial device to IP networks with a 10/100BaseT interface. LSHM-201 Serial TTL Ethernet 3.3 VDC 1" x 1" x 0.25"(H) Same functionality as LSHM-200 but with external Flash memory allows making changes to web server application via Telnet or FTP. LSDB-200 Serial RS232 Ethernet 5 VDC 1.2" x 3" x 0.63"(H) Serial-to-Ethernet module with DB9 male, RJ45 and power connectors installed. LSDB-201 Serial RS232 Ethernet 5 VDC 1.2" x 3" x 0.63"(H) LSHM-201 on a carrier board with DB9 male, RJ45 and power connectors installed. LSMB-200V Serial RS232 Ethernet 5V to 48VDC 2.5" x 2.6" x 0.63"(H) Serial-to-Ethernet module with DB9 male, RJ-45 connectors. 5V to 48V VCC support. LSMB-200M Serial RS232 Ethernet Telco(modem) 5 VDC 2.5" x 3.0" x 0.68"(H) Serial-to-Ethernet module with DB9, RJ-45 jack and a 56kbps Dial-up modem installed. LSDK-2001 Development Kit includes: LSHM-200 (Serial-to-Ethernet Module) LSDB (Serial-to-Ethernet Development Board) Power Adapter DB9(M) to DB9(F) RJ45 CAT5 Ethernet Cable LSHM-200 and LSDK-2001 Manual   LSDK-2011 Development Kit includes: LSHM-201 (Serial-to-Ethernet Module) LSDB (Serial-to-Ethernet Development Board) Power Adapter DB9(M) to DB9(F) RJ45 CAT5 Ethernet Cable LSHM-201 and LSDK-2011 Manual

Mechanical Diagram & Pin Assignments - LSHM-200 / LSHM-201

Note:

1. Pin spacing is 0.100 inch from center to center.

2. Suggested mating female connector:

            Samtec P/N. #SSW-110-21-G-S (RoHS Thru-Hole)

            Samtec P/N. #SSW-110-22-G-S-VS (RoHS SMT)

3. Square pins - 0.025" x 0.025"