USB Dongle Modem - the V92HU-E2
|
|
|
|
|
Available: |
 |
Size: 0.55" (H) x 0.75" (W) x 2.5" (L) |
|
Linux, Windows, Mac O/S support |
|
56K bps Data, Fax, Voice |
|
CDC-ACM Compliant |
|
Global Telecom Compliant |
|
|
|
|
This pen-sized dongle USB modem features a hardware-based modem controller and digital signal processor (DSP). Unlike software-based USB modems, the V92HU-E2 manages all modem functionality internally without utilizing the system resources of the host PC. The modem operates with CDC-compliant computers with Linux, Windows or Mac operating system (O/S). It is ideal for applications including Notebooks, Desktop PC, Workstation, Small Business Computers (SBC) and Embedded Systems where dial-up connectivity is needed.
Measuring only 0.55" (14mm) x 0.75" (18mm) x 2.5" (64mm), weighing less than 1 oz., the V92HU-E2 fits in your pocket or can easily be tucked away in a briefcase or stored in the smallest of notebook cases.
The modem provides 300 bps to 56Kbps data rates, 14.4K bps fax, on line voice playback and recording, and a hot swappable USB interface. Other features include Caller ID, Modem-on-hold, Caller waiting detection, Data/Fax/Voice call discrimination, Quick connect, and Extension pickup detection. Modem customization is available through patch code that can be stored in modems on board memory.
The V92HU-E2 meets RoHS compliance directives, and conforms to all standards required for immediate shipping to US, Canada, Europe and other major industrial countries around the world. Features:
Compatible with both USB 1.1 and USB 2.0 host controllers -
USB 2.0 compatible hot swappable interface
CDC-ACM compliant -
Linux, Windows and Mac O/S support
USB cable and RJ-11 phone jack built in -
AT command set
-
Up to V92 56K bps data speed
Send / Receive 14.4 kbps Fax speed Class 1 and 1.0 TAM - On line Voice playback and recording -
Data flow control and speed buffering
-
Automatic format / speed sensing
V.44 data compression V.42bis and MNP-5 data compression -
V.29 FastPOS support
Concurrent DTMF, ring and caller ID detection -
Line-in use, extension pick-up and remote hang-up detection
Caller ID type I and II for select countries -
NVRAM for storing AT commands, telephone number and country configuration
Agency approvals:
Ratings @ 25o C
Parameter |
Min |
Typ |
Max |
Units |
| Tip / Ring Current Continuous |
10 |
20 |
120 |
mA |
| Dielectric Withstanding Voltage |
|
|
1500 |
VRMS |
| Operating Temperature |
0 |
|
+70 |
°C |
| Relative Humidity (non-condensing) |
10 |
|
95 |
% |
|
Current Consumption:
On-Hook |
|
82 |
|
mA |
|
Current Consumption:
Off-Hook
|
|
94 |
|
mA |
| Transmit & Receive Level |
-10 |
-20 |
-43 |
dBm |
____________________________________________________________________________________________________________ Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners. |
^Back to top |
|
