Bluetooth including 4.0 Low Energy HCI Modules for OEM’s
- Serial UART / USB 2.0 Interfaces
- V4.0 BLE. Classic BR/EDR
|
|
|
Fully qualified Bluetooth® v4.0 system
|
|
Full-speed Bluetooth operation with full piconet and scatternet support
|
|
Wideband speech
|
|
High-sensitivity Bluetooth receiver
|
|
Support for IEEE 802®.11 coexistence
|
|
Compatible with Linux (BlueZ) and Windows OS
|
|
Model: RB2001 & RB2001HM |
|
|
Radicom Research’s RB2001 Bluetooth modules are based on CSR’s latest Host Controller Interface (HCI) solution. The RB2001 provides a fully qualified Bluetooth V4.0 system for data and voice communications. The RB2001 Bluetooth modules are controlled via CSR’s Host Controller Interface (HCI) BlueCore BCCMD Commands.
The RB2001 is a SMT dual mode Bluetooth module. The RB2001HM is a DIP (Through-Hole). Both modules are capable of communicating with Bluetooth low energy mode devices as well as the ‘classic’ Bluetooth devices.
The RB2001 modules support serial UART, PCM, I²S or USB interfaces. The RB2001 and RB2001HM are serial modules. The RB2001U and RB2001UHM are USB modules. With unique Wideband Speech, improved CODEC and a reduction of background noise and interface built in, the RB2001 offers a dramatic improvement to call quality with wireless accessories.
These modules are designed to work with Linux and Windows operating systems.
Features:
- Fully qualified Bluetooth Bluetooth® v4.0 system
- Full-speed Bluetooth operation with full piconet and scatternet support
- Class 1, 2 and 3 Bluetooth power level supported
- 2Mbps and 3Mbps EDR support
- High-sensitivity Bluetooth receiver
- Wideband speech
- A-law, μ-law and linear voice data from Host
- A-law, μ-law, and CVSD voice over the air
- Extended temperature operation -40°C to +85°C
- Voice interpolation for lost packets
- Rate mismatch correction
- PCM/I2S digital audio interface
- Fast AGC for enhanced dynamic range
- SBC encoding
- Integrated synthesizer requiring no external VCO varactor diode, resonator or loop filter
- 3 Bluetooth low energy connections at the same time as basic rate A2DP
- Low power 3.3V I/O (optional 1.8V)
- Serial Interface (RB2001)
- USB interface (RB2001U)
- Full-speed (12Mbps) USB 2.0 interface (RB2001U)
- High-speed UART port (up to 4Mbps)
- Support for IEEE 802®.11 coexistence
- Digital demodulator for improved sensitivity and co-channel rejection
- Real time digitized RSSI available on HCI interface
- Dual-mode Bluetooth low energy radio
Sample Applications:
Smart Energy: |
Health Care Devices: |
Home / Industrial Automation: |
Lighting Control
-
HVAC Control
-
Thermostats
-
Appliances
|
Glucose Monitor
-
Heart-rate
Monitor
-
Blood Pressure Monitor
-
Trainers, Fitness Device
|
Security Cameras
-
Security Alarm System
-
Automotive Devices
-
Industrial Sensors
|
Specifications:
Dimensions
|
RB2001 SMT Module 0.650"
x 1.100" x 0.104"
RB2001HM Dip Module1.00" x 1.143" x 0.30"
|
Device Type
|
Embedded Bluetooth OEM
modules
|
Interface
Supported
|
RB2001: Serial UART
RB2001HM: Serial UART
RB2001U: USB
RB2001UHM: USB
|
Data Link Protocol
|
Bluetooth 4.0
|
Frequency
|
2.402 – 2.480 GHz
|
Transmit Power
|
4dBm (typical)
|
Receiver Sensitivity
|
-84dBm (typical)
|
Bluetooth Class
|
Class 2
|
Range
|
Up to 10 meters
|
Power Consumption
|
Host (Master) Idle:
12.1mA Typical: 15.2mA Max: 18.5mA
Client (Slave) Idle: 12.1mA Typical: 15.2mA
Max: 25.2mA
|
Power Supply Voltage
|
Minimum: 3.1V Maximum: 3.6V
|
Operating Temperature
|
-40ºC to +85ºC
|
Environmental
|
RoHS compliant
|
|
|
Ordering Information
Model Number |
Description |
RB2001
|
RB2001
Serial
version,
Surface
mount, class
2 Bluetooth
HCI module
with
on-board
antenna
RB2001U USB
version,
Surface
mount, class
2, Bluetooth
HCI module
with
on-board
antenna
|
RB2001HM
|
RB2001HM
Serial
version, DIP
Through
Hole, class
2 Bluetooth
HCI module
with
on-board
antenna
RB2001UHM
USB version,
DIP Through
Hole, class
2, Bluetooth
HCI module
with
on-board
antenna
|
RDB1000
|
RDB1000
Evaluation
PCB with the
RB2001HM
installed
|
RB2001 Kit
|
Evaluation
Kit. Each
kit consists
of 2 each of the
following
components:
1. Two RB2001HM
or RB2001UHM
modules on
RDB1000 development
boards
2. USB
cables (A to
B)
3. Null
modem cables
for serial
version (DB9F to
DB9F)
* Includes
script files
to setup one
RB2001
module as a host
and the
other RB2001 as
a client.
|
|
Mechanical Diagram & Pin Assignments - RB2001
Note: Pad size for RB2001 is 0.0600" x 0.03937"
PIN |
|
PIN |
|
PIN |
|
30 |
GND |
19 |
GPIO0 (I/O) |
1 |
GND |
29 |
GND |
18 |
GPIO1 (I/O) |
2 |
GND |
28 |
GND |
17 |
GPIO4 (I/O) |
3 |
GND |
27 |
GPIO_5 (I/O) |
16 |
SPI_CLK/PCMCLK/I2S (I) |
4 |
/PCM_SEL/I2S (I/O) |
26 |
SPI_MOSI/PCM_IN/I2S (I/O) |
15 |
GPIO3 (I/O) |
5 |
UART_CTS (I) |
25 |
SPI_MISO/PCMI_OUT/I2S (I/O) |
14 |
GPIO2 (I/O) |
6 |
POWER_ON (I) |
24 |
SPI_CS#/PCM_SYNC/I2S (I/O) |
13 |
USB_DN (I) |
7 |
UART_RTS (O) |
23 |
USB_5V_IN (I) |
12 |
USB_DP (I) |
8 |
UART_TXD (O) |
22 |
/RESET (I) |
|
|
9 |
UART_RXD (I) |
21 |
GND |
|
|
10 |
GND (P) |
20 |
GND |
|
|
11 |
VDD_IN (P) |
I: Input
O: Output
I/O: Input/Output
P: Power
Mechanical Diagram & Pin Assignments - RB2001HM
PIN |
|
PIN |
|
1 |
KEY_ |
20 |
POWER_ON |
2 |
GPIO_3 (I/O) |
19 |
UART_RXD (I) |
3 |
N/A |
18 |
UART_TXD (O) |
4 |
3.3V (P) |
17 |
UART_RTS (O) |
5 |
/RESET (I) |
16 |
GPIO_2 (I/O) |
6 |
GND |
15 |
GPIO_0 (I/O) |
7 |
USB_DN (I/O) |
14 |
UART_CTS (I) |
8 |
USB_DP (I/O) |
13 |
GPIO_1 (I/O) |
9 |
N/A |
12 |
N/A |
10 |
N/A |
11 |
N/A |
I: Input
O: Output
I/O: Input/Output
P: Power
Note:
Pin spacing is 0.100" from center to center for HM module
-
Square pins - 0.025" x 0.025" for HM module
-
Suggested mating female connectors:
Through Hole: |
a. Samtec P/N. #SSW-110-21-G-S (RoHS) |
b. Molex P/N. #90147-1208
(non-RoHS) |
SMT: |
a. Samtec P/N. #SSW-110-22-G-S-VS (RoHS) |
_________________________________________________________________________________________________________ Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners. ^Back to top |
|