USB V.92 Modems With hardware-based modem controller and DSP. RoHS Compliant
V92HU Embedded USB Modem Module V92HU-E Stand-alone USB Modem Radicoms USB Modem features a completely integrated global DAA, and hardware-based modem controller and DSP. It is Communication Device Class (CDC) compliant. The modem supports O/S including Windows 98SE, ME, 2000 and XP, Linux, Mac and Sun workstations. It provides V.92/56K data rates, voice, fax capabilities and a hot-swappable USB 2.0 interface. There are two form factors of the USB V.92 Modems. Measuring just 1 x 1 x 0.1, the V92HU modem module allows embedded applications designers to add USB modem functionality into their system mother board without taxing engineering resources. The V92HU-E is a compact stand-alone modem with USB and RJ-11 connectors built in. Just plug the modem into USB port of your devices, the modem will be powered through the USB port, no external power supply is required. Features:
USB 2.0 compatible
Hardware-based modem controller and DSP
Enhanced AT Command set
Single 3.3V supply - modem module
Size: 1.0 (w) x 1.0 (D) x 0.45 (H) - (V92HU)
Size: 1.4 (w) x 2.5 (D) x 1.0 (H) - (V92HU-E)
V92, 56Kbps data speed - downstream
48Kbps data speed - upstream
Automatic auto answer, format and speed sensing
14.4 kbps Fax Class 1.0
Voice playback and recording
V.44, V42bis and MNP 5 data compression
V.42 LAPM and MNP 2-4 error correction
LED power indication - Stand-alone model
Line-in use, extension pick-up and remote hang-up detection
Line current lost detection
Dialing - DTMF tone, pulse, blind
Caller waiting detection, Caller ID type I and II for select countries
ITU V.80, V.29 Fast POS, V.27 ter, Bell 212A and Bell 103 support
Digital Line Guard (DLG) protection
Regulatory approvals:
FCC15B, IECS03, EN5022B, EN55024 compliance
FCC68, CS-03, CTR 21 certified
System compatibility - CDC compliant systems
Windows 98SE, ME, 2000 and XP operating systems
Linux operating systems
Macintosh computers and Sun workstations
Development Kit (MDK-2001) Includes 2 each of WHM900 Wireless Modems, Development Interface Boards, RS232 Serial Cables, DB25 to DB9 Adapters, Power Adapters and Ό wave RP SMA Antennas. Click here for Mechanical Diagram & Pin Assignments Diagram Ratings @ 25o C
Parameter |
Min |
Typ |
Max |
Units |
Tip / Ring Current Continuous |
10 |
20 |
120 |
mA |
Dielectric Withstanding Voltage |
- |
- |
1500 |
VRMS |
Operating Temperature |
0 |
- |
70 |
oC |
Relative Humidity (non-condensing) |
10 |
- |
95 |
o/o |
Voltage Requirement |
4.75 |
5.0 |
5.25 |
VDC |
Current Consumption |
80 |
95 |
99 |
mA |
Transmit & Receive Level |
-10 (Tx) |
-20 |
-43 (Rx) |
dBm |
Mechanical Diagram & Pin Assignments - V92HU 
Note:
Pin spacing is 0.100" from center to center.
Square pins - 0.025" x 0.025"
Suggested mating female connectors: Through Hole:
Samtec P/N. #SSW-108-21-G-S (RoHS)
Molex P/N. #90147-1208 (non-RoHS)
SMT:
a. Samtec P/N. #SSW-108-22-G-S-VS (RoHS)
____________________________ Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners. ^Back to top |
|